Joining has always been a slow, difficult process. Never again, thanks to the Festool Domino joining system. The system consists of the Domino joiner and pre-fabricated, beech and sipo Domino tenons. The Domino joiner, with its revolutionary cutting method, simple indexing features and adjustable mortise sizing, makes flawless mortises every single time. The Domino tenon is equally as impressive - it is 100% rotation-proof and far stronger than either biscuits or dowels. It also has a large gluing surface area for extra strength.Please note that the Domino DF 500 can be purchased as a set, which includes the optional trim and cross stop. See purchasing options below.
- Unique, patented cutting action that rotates and oscillates to create perfect, clean, and repeatable mortises every time.
- Mortise width adjustment with the turn of a dial allows for easier alignment when joining panels.
- Pivoting Fence allows you to create angled mortises from 0-90° with positive stops at 22.5°, 45°, 67.5°.
- Indexing pins for quick alignment against the edge of the workpiece for accurate placement.
Features & Benefits
Patented Routing PrincipleThe spiral cutter rotates and oscillates to create perfect mortises.
Mortise Width AdjustmentAdjusting the width of the mortise allows for easier alignment when joining panels.
PositioningWith an adjustable fence angle, retractable stop flaps, adjustable cutter height with step gauge, and precise mortise depth stop, the Domino joiner enables precise mortise placement and spacing.
Pivoting FenceFence creates angled mortises from 0-90° with positive stops at 22.5°, 45°, 67.5°.
Depth ControlQuick, precise adjustment for five different mortising depths, relative to the size of the tenon required for the application.
Stepped Height Stop7 different step positions for different material thicknesses for fast and easy fence height adjustment.
Dust ExtractionYour mortises are clean and ready for glue when the Domino is used in combination with a dust extractor. Proper dust extraction greatly extends cutter life.
Carbide Tip Spiral BitDurable, long-lasting bit withstands 5,000-14,000 joints depending on material.
Rapid Bit ChangeMeans you can change a bit in under 30 seconds to match desired tenon size.
Three Years of coverage. 48 Hours Turnaround Period.